Hello all, I was hoping I could get some advice on purchasing a Hobie cat, I haven't had much experience in these so I wanted to check a few things with y'all.
I really appreciated the advice that was given to me here last time I bought one of these. It wasn't savable and I was talked out of trying to. I was able to sell it for what I paid to someone willing to use parts thankfully. If anyone is in the Brevard Florida area I'd really like to learn some more about these from people that know.
I looked at a Hobie today, the gentleman is selling it on consignment and while I was looking at it changed his price from $1800 down to $1300. It is a '81 if I read the serial number right, in white with a trailer. The trailer seems in fine condition (minor rusting on the surface) and includes a good long sail box.
The boat itself looks like it was painted white at one point instead of redoing the gelcoat an the paint is flaking in small areas. But I'm worried about the hulls, in the pictures below my hand shows where a soft spot starts in front of the forward pylon, this spot is the same on both hulls. Beyond that the starboard side does have some further soft spots up front of that though I wasn't able to push hard enough to hear any crunching so I think the fiberglass itself is probably fine? It is soft between the pylons on the side as well. And, oddly, the previous owner has affixed a length of woof the entire length of the keel on both sides. I assume it's to hold up when beaching, but I'd like y'alls advice on this.
The mast is straight, the sails seems used but still crisp with some very small rust looking stains on them. It has an Aussie something (This is where my knowledge of terms is running short) and a 6:1 3inch Hardken system.
It'll be about a month or so before I can make a purchase and it's right above where my budget stops, so I'd like some advice on it. There's another one I'll be looking at that is a bit cheaper in the next county over, if it seems good I'll be asking some more questions on here I'm sure.
Here's the serial on the hull, I glanced quick and it looked like the numbers on each matched.
http://i702.photobucket.com/albums/ww24 ... 7675_n.jpgHere's my hand showing the start of a soft spot in front of the pylon.
http://i702.photobucket.com/albums/ww24 ... 1549_n.jpgThis is loose, I assume I can just tighten down if I buy the boat?
http://i702.photobucket.com/albums/ww24 ... 6381_n.jpgJudging by stickers on the boat and trailer this cat has been sailed for a few seasons up in the NC area.
http://i702.photobucket.com/albums/ww24 ... 9664_n.jpgMast seems to be straight, and most the lines seem alright though I realize I'll want to get new rigging and probably a new tramp cloth, I would hope to be able to do that after this season.
http://i702.photobucket.com/albums/ww24 ... 0769_n.jpgIf anyone is in Brevard Florida I would really appreciate some help in looking at my options as well as just learning how it all works.