Return to Hobie.com
Hobie Forums
It is currently Sun Jul 06, 2025 9:06 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Jul 11, 2016 10:09 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 11, 2016 4:22 pm
Posts: 4
Long story short: 20 years ago, my husband (now ex) had a Hobie 18 which we sailed on a smallish lake in northern Iowa for a couple of summers. We took it with us when we moved to AZ but then started our family and ended up selling the boat. I've moved back to the smallish lake town in Iowa and bought an '81 Hobie 16, which I have no idea how to sail. A friend of mine said it was pretty dangerous for me to try to learn how to sail it by myself (I'll be 50 in Sept.) and suggested I find a Hobie 14. I just bought a '79 H14 that was turned into a Turbo but the guy I bought it from had never used the jib. I've got all the pieces (I think) and am wondering how to rig it. If I don't install the jib, do I still need to put the furler thing on the forestay? I had a heck of a time trying to get the forestay attached when I was practicing stepping the mast on dry land. Any suggestions would be GREATLY appreciated!

I've got 2 Hobies, neither of which I know how to sail...I feel like Gilligan :wink:


Top
 Profile  
 
PostPosted: Tue Jul 12, 2016 5:54 pm 
Offline
Site Rank - Admiral

Joined: Sat Dec 08, 2007 1:02 pm
Posts: 188
Location: Lake of the Ozarks
If you don't have a pair of Standard (non Turbo) bridle wires, yes you'll need to use the furler.

Another thing to ease the pain...
Move one, or both, of your side stays to the top hole of adjuster plate (at hull top) to step the mast.
Then, while pulling down on trapeze wire, move the pin back to sailing position.

_________________
1984 H16 "Mister Rogers"
1984 H14 "Sundays"
2000 H20 "Jet"
Sheet In, Max Out


Top
 Profile  
 
PostPosted: Tue Jul 12, 2016 7:09 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Jan 16, 2016 9:27 am
Posts: 20
You need a different boat... check out the Hobie Bravo. Great starter boat, 12 ft long and yet lots of fun.

_________________
HH the Great Ham
Bravo Owner


Top
 Profile  
 
PostPosted: Tue Jul 12, 2016 9:46 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 11, 2016 4:22 pm
Posts: 4
I've already got 2 Hobies that I don't know how to sail, don't have enough room to store another. My boyfriend is fabricating a kind of gin pole set up on my trailer so I can step the mast on my H14 by myself since he travels all the time for his job. I was practicing with it and could have done it but the forestay was just a bit short of reaching that shackle thing on the front where the 2 wires come together from the hulls. I've got the furler and the jib for that matter but was hoping to just start with the main until I got things figured out.


Top
 Profile  
 
PostPosted: Thu Jul 14, 2016 7:31 am 
Offline
Site Rank - Old Salt

Joined: Mon May 24, 2004 10:33 am
Posts: 709
Location: Clinton, Mississippi
As flatlander says, on the 14T you have to loosen the rig (move shrouds to top hole) before stepping the mast, then tighten them back up afterwards.

The beauty of a furler is that you can sail with or without the jib at will, so I'd leave the jib on and furl it when you don't want it.

Post your Iowa location.....there may be someone on here nearby to meet up with and get some help. I know there are lots around Storm Lake, Clear Lake, etc.

As long as you and the boat are in reasonable shape, I think the 14T would be a great boat to learn on. Practice righting it sooner rather than later.

Be safe!

_________________
Jerome Vaughan
Hobie 16


Top
 Profile  
 
PostPosted: Thu Jul 14, 2016 9:38 am 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 11, 2016 4:22 pm
Posts: 4
Thanks for the info Jerome! I'm in Clear Lake, IA. I have to trailer my boat because the waiting list for space on a public dock is 12 YEARS long! My H14 is sitting on a trailer at my bf's acreage just waiting to hit the water but I'm still practicing on rigging her before I get out on the water. She's in really good shape for her age ('79) and I'm in fairly decent shape as well for my age ('66)! I just don't want to get out on the water and figure out that I missed something in the rigging. The guy I bought the boat from took the time to turn in into a Turbo thinking his kids would want to sail it when they got older since they had had so much fun dragging from the dolphin striker when they were little but it just sat in his garage. So he basically never sailed it as a Turbo. Hopefully this weekend is the big maiden voyage for us :)


Top
 Profile  
 
PostPosted: Wed Jul 20, 2016 2:22 pm 
Offline
Site Rank - Old Salt

Joined: Mon May 24, 2004 10:33 am
Posts: 709
Location: Clinton, Mississippi
If you don't know them already, get in touch with Chris Wessels and his gang around Clear Lake.

On the HCANA site, the Clear Lake (Fleet 10) contact is listed as Jeff Griffin:

http://hcana.hobieclass.com/hobie-fleets/

_________________
Jerome Vaughan
Hobie 16


Top
 Profile  
 
PostPosted: Wed Jul 20, 2016 8:33 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 11, 2016 4:22 pm
Posts: 4
Chris is the reason I now own 2 boats :) Went to see him about my H16 and he pretty much told me it was too much boat for a single female that hadn't sailed in over 20 years to be learning alone on. Then he hooked me up with another guy and that's how I ended up with my H14 turned Turbo, only former owner never sailed it with the jib. Come hell or high water, I'm going to get it on the water this weekend and stay out until I know what I'm doing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group