Return to Hobie.com
Hobie Forums
It is currently Wed Sep 10, 2025 2:00 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu May 03, 2007 5:08 pm 
Offline
Site Rank - Captain

Joined: Thu Feb 22, 2007 3:10 pm
Posts: 39
Location: Fresno Ca
Well i took my cat out for the first time in decent wind. I got the hull out of the water pretty high a few times but when i pulled really tight on the main sheet...SNAP! the mast blew over. The shrouds had a few broken strands and i had no clue how old they so i ordered new ones last week but they didnt come in time. I was so excited that there was wind and i had somebody to sail with i went and paid the price. Lesson learned. So now i have a small tear in my sail. is sail tape the best way to fix it? Another thing was when i was going fast there is this moaning/huming sound from the rudders? is that normal? I hope my shrouds get here soon.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 03, 2007 5:24 pm 
Offline
Site Rank - Old Salt

Joined: Sat Feb 24, 2007 8:45 pm
Posts: 1668
Location: Northfield Minnesota
The humming of the rudders is normal, the plastic blades vibrate.
Send your sail to a sail loft and have it repaired. Tape is a band-aid not a fix. Depending on your budget either have the panel replaced, or a patch. I think Whirlwind does repair, but I'm not sure.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 03, 2007 5:27 pm 
Offline
Site Rank - Old Salt

Joined: Mon Oct 09, 2006 2:34 pm
Posts: 621
Location: NC
Sorry to hear about your unfortunate ordeal. Just be glad that you or someone else wasn't seriously hurt. As for the sail, you should be ok using a little sail tape, I have a few on my main as well. Eventually you may want to look into getting them professionaly repaired. The sound you hear from your rudders is normal. Once you get up to speed they will start to vibrate, I kind of like the way it sounds. I believe that there is a way to shape the trailing edge with siscors, you could probably find it here through a search. I'm sure that the more experienced sailors will chime in. But again, I'm glad ya'll didn't get hurt. And congrats on getting the hull airbone, feels good doesn't it?

_________________
James
86' Redline Hobie 16
Sail # 76909


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 03, 2007 5:59 pm 
Offline
Site Rank - Old Salt

Joined: Sun Jan 08, 2006 1:20 pm
Posts: 418
Location: West Maui
The rudder hum is caused by the water moving over the trailing edge of the rudder. Square the training edge by either filing or dragging the blade of a pair of scissors over them. You may have to do it a couple of times to get rid of the hum.

_________________
Image


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 03, 2007 6:01 pm 
Offline
Site Rank - Old Salt

Joined: Sat Feb 24, 2007 8:45 pm
Posts: 1668
Location: Northfield Minnesota
How does squaring off the trailing edge do this? I'm not doubting you, just the opposite of what you would think.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 03, 2007 8:29 pm 
Offline
Site Rank - Old Salt

Joined: Sun Jan 08, 2006 1:20 pm
Posts: 418
Location: West Maui
It is counterintuitive. Read through this.

http://www.hobiecat.com/community/viewt ... ght=#11738

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group