Return to Hobie.com
Hobie Forums
It is currently Thu Oct 31, 2024 4:50 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Aug 18, 2020 1:07 pm 
Offline
Site Rank - Admiral

Joined: Tue Jul 24, 2018 12:20 pm
Posts: 166
Location: Galveston, Texas
Changing to 8:1 mainsheet - do I need 2 double blocks at boom? I have a set-up for an 8:1, but the 4 way block is on the traveler and I'm using 2, 2-way blocks (one with becket) on original attachment points on boom. That big 4-way on the car is a pain. I notice most cats have it up on the boom with one attachment point. Any reason not to switch to a single point attachment on the boom? Excess force from the size of sail, etc.? It sure would clean up that mess...

_________________
ChuckC
H21SE- 408


Top
 Profile  
 
PostPosted: Wed Aug 26, 2020 11:49 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15076
Location: Oceanside, California
May stress the bale or attachment points.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
PostPosted: Fri Aug 28, 2020 1:43 pm 
Offline
Site Rank - Admiral

Joined: Tue Jul 24, 2018 12:20 pm
Posts: 166
Location: Galveston, Texas
Yup - I'll arrange to gang the attachment somehow. Likely reverse the front bale by re-riveting so they're close together, then I can attach with a shackle.

Thanks - will post solution when done.

_________________
ChuckC
H21SE- 408


Top
 Profile  
 
PostPosted: Fri Sep 25, 2020 7:19 am 
Offline
Site Rank - Admiral

Joined: Tue Jul 24, 2018 12:20 pm
Posts: 166
Location: Galveston, Texas
Follow up:

I left things alone for my last race, well because I ran out of time and didn't want to get into another project. And, found it wasn't necessary to modify at all. I don't know what changed between last time and this, but the 2, double blocks on the boom work just fine and the rotating quad block on the traveler didn't get fouled. I may have re-organized the sheaving, but don't recall. So, leaving two original mounted blocks for now.

ps Absolutely loving the boat, now that I'm getting used to it. Stinks summer is about gone...

_________________
ChuckC
H21SE- 408


Top
 Profile  
 
PostPosted: Sat Sep 26, 2020 4:26 am 
Offline
Site Rank - Captain

Joined: Fri Aug 09, 2013 7:51 am
Posts: 72
I had 12:1 blocks on my 21SE attached to a single bale on the boom. Worked fine for years, never any damage. I would fly a hull with 3 sitting on the wing, so I loaded the boom up fairly hard, but I am sure I could have stressed it harder than I did.

_________________
Scott
Hobie 18 w/wings
Hobie/Holder 12 Funseeker
2 Hobie Waves
Tandem Oasis Kayak
Hobie 16
Southern California


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group