Return to Hobie.com
Hobie Forums
It is currently Tue May 13, 2025 4:38 pm

Board index » Hobie Catamaran Sailing » Hobie Wave

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
bwinston
PostPosted: Wed Apr 24, 2019 8:48 am 
Offline
Site Rank - Deck Hand

Joined: Wed Apr 24, 2019 8:28 am
Posts: 5
I would like to upgrade the standing rigging on a ClassicWave with ClubWave standing rigging. How about it?
Top
 Profile  
 
mmiller
PostPosted: Wed Apr 24, 2019 11:54 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15083
Location: Oceanside, California
It will work. You may need to alter the shroud chain plates (Drill) to accept a 1/4" clevis pin.

Depending on the age of the boat the bow eyes may be difficult to remove for bridle installation. YOu might have to add shackles there.

Parts are listed on the parts diagram:

https://static.hobiecat.com/digital_assets/Wave_March_2017.pdf#page=3

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
bwinston
PostPosted: Wed Apr 24, 2019 12:03 pm 
Offline
Site Rank - Deck Hand

Joined: Wed Apr 24, 2019 8:28 am
Posts: 5
Thanks Matt,
I really appreciate this forum and your quick reply.
Top
 Profile  
 
sixkush
PostPosted: Thu Apr 27, 2023 6:49 am 
Offline
Site Rank - Deck Hand

Joined: Wed Oct 12, 2022 12:44 pm
Posts: 1
mmiller wrote:
It will work. You may need to alter the shroud chain plates (Drill) to accept a 1/4" clevis pin.

Depending on the age of the boat the bow eyes may be difficult to remove for bridle installation. YOu might have to add shackles there.

Parts are listed on the parts diagram:

https://static.hobiecat.com/digital_assets/Wave_March_2017.pdf#page=3


Could one use a 3/16 clevis pin and still use the existing chain plates on the Classic?
Top
 Profile  
 
mmiller
PostPosted: Fri Apr 28, 2023 12:50 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15083
Location: Oceanside, California
You could use the existing adjusters and the 3/16" pins.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)
Top
 Profile  
 
Wavesurf57
PostPosted: Sat Apr 29, 2023 4:31 pm 
Offline
Site Rank - Deck Hand

Joined: Sat May 16, 2020 4:01 pm
Posts: 19
Location: Cape Cod
Id like to add that drilling your chain plates and changing all pins to 1/4 (6mm) is a good upgrade if you sail in higher winds.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Hobie Catamaran Sailing » Hobie Wave

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group