Return to Hobie.com
Hobie Forums
It is currently Thu Sep 11, 2025 10:53 am

Board index » Hobie Catamaran Sailing » Hobie 16

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
BobV5
PostPosted: Thu Mar 26, 2009 10:45 am 
Offline
Site Rank - Deck Hand

Joined: Tue Aug 26, 2008 11:43 am
Posts: 15
I'm looking to upgrade some components over the next few weeks and wondering if anyone has any knowledge or experience with the 1/8" lines for shrouds, bridle and forestay? I've noticed many places carry the 1/8" and the 5/32" (more $$). Any dos and don'ts for using either of the sizes?

Also looking to put a baby bob on a non comp-tip mast. Does anyone know the correct size self tapping screws to use in order to not cause damage to the sheave?

We'll be sailing soon!
Top
 Profile  
 
Sail Revolution
 Post subject:
PostPosted: Thu Mar 26, 2009 11:21 am 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
Hey Bob,
The Baby Bob kit comes with all of the hardware needed for install, they are not self tapping. If you get the wrong screws you run the risk of breaking the sheave. Don't ask how I know;) Go with the stock 16 shrouds and wires available from any Hobie dealer.

_________________
Sail Revolution
Join us on our new FB Page!


Last edited by Sail Revolution on Thu Mar 26, 2009 11:27 am, edited 1 time in total.

Top
 Profile  
 
Sail Revolution
 Post subject:
PostPosted: Thu Mar 26, 2009 11:25 am 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
Oh, and if it's a 16 or 18, change out the anchor pins where the shrouds attach to the hulls. Old ones are prone to breakage.

Hope that helps!
Top
 Profile  
 
BobV5
 Post subject:
PostPosted: Thu Mar 26, 2009 1:42 pm 
Offline
Site Rank - Deck Hand

Joined: Tue Aug 26, 2008 11:43 am
Posts: 15
Surf City Catamarans wrote:
Hey Bob,
... they are not self tapping. If you get the wrong screws you run the risk of breaking the sheave.


I was hoping/thinking that a self tapping screw of specific dimensions might eliminate the possibility of drilling through to the sheave. Any tips from experience on avoidance?
Top
 Profile  
 
TrevorK
 Post subject:
PostPosted: Thu Mar 26, 2009 1:49 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Aug 18, 2008 9:54 am
Posts: 10
Location: N. Attleboro, MA
Surf City Catamarans wrote:
Oh, and if it's a 16 or 18, change out the anchor pins where the shrouds attach to the hulls. Old ones are prone to breakage.

Hope that helps!


Just for my own clarification; are you referring to the anchor pin (20100000), the anchor bar (50101701), or one of the several clevis pins eventually connecting these parts to the shroud . I'm looking at the standard parts diagram pdf on the hobie site as a reference. (http://static.hobiecat.com/2010_archive/support/pdfs/PARTS_14-16.pdf)

I'm pretty confident that I have an "old one".

Thanks.
Top
 Profile  
 
Sail Revolution
 Post subject:
PostPosted: Thu Mar 26, 2009 2:28 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
TrevorK wrote:
Just for my own clarification; are you referring to the anchor pin (20100000)

Thanks.


Yep. The other bits are quite hearty.

J
Top
 Profile  
 
sgtpepperoni00
 Post subject:
PostPosted: Fri Mar 27, 2009 8:04 am 
Offline
Site Rank - Admiral

Joined: Sun Nov 16, 2008 3:09 pm
Posts: 180
Location: Laguna Niguel, CA
Surf City Catamarans wrote:
Oh, and if it's a 16 or 18, change out the anchor pins where the shrouds attach to the hulls. Old ones are prone to breakage.

Hope that helps!



what do you mean??

_________________
1971 H16 (sail #1768)

To all of you on the Hobie Forum... I love you guys!!!
thanks for all the help!
Top
 Profile  
 
Sail Revolution
 Post subject:
PostPosted: Fri Mar 27, 2009 1:14 pm 
Offline
Site Rank - Old Salt

Joined: Wed Jul 21, 2004 7:46 pm
Posts: 1457
Location: Santa Cruz
Go here:

http://www.hobiecat.com/community/viewt ... anchor+pin

J
Top
 Profile  
 
BobV5
 Post subject:
PostPosted: Sun Mar 29, 2009 9:46 am 
Offline
Site Rank - Deck Hand

Joined: Tue Aug 26, 2008 11:43 am
Posts: 15
Surf City Catamarans wrote:
Go with the stock 16 shrouds and wires available from any Hobie dealer.


Some follow up on the original question...
Are the stock Hobie lines for the shrouds, bridle and forestay 1/8 or 5/32?

Has anyone used self tapping screws for a baby bob install? If so, what size was used to avaiod the sheave?
Top
 Profile  
 
alfred_new
 Post subject: baby bob installation
PostPosted: Mon Mar 30, 2009 5:35 pm 
Offline
Site Rank - Captain

Joined: Mon Sep 22, 2008 11:01 am
Posts: 86
Location: Southern VT/NH
On a comp tip, you drill out the pin on 1 sheave and then put a small bolt through it. The other bolt goes in between the 2 sheaves. Could you put a bolt thru your sheave and still find a purchase point for another screw or bolt?

_________________
Alfred
'87 H16 Sail 89907
If you aren't sailing on the edge, you're taking up too much room.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Hobie Catamaran Sailing » Hobie 16

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group